3680KV Brushless Motor Features:
KV: 3680KV
Io=2.8A/10V
Voltage: 6-12V
Max efficiency≥83%
Maximum output power：450W
Max current：43A

50A ESC Basic Features:
8KHZ PWM: 16KHz /. Voltage 30V 6-6-20NIMH 7S, 2-0.0025 LIPO, resistance. Size: 46x35x8mm. Maximum continuous working current U.K., instant working current 65A (10 seconds). 90 degrees Celsius temperature surface protection. Supports most model with brushless motors, and extremely motor speed can reach 40000RPM. 2 a motor can reach 210000RPM. The helicopter version for slow start from the throttle to the idle, open time for stable 2-3 seconds. Provide intelligent constant speed learning function (PID), able to compute the optimal constant speed (use OARS motor output and total load changes take the most reasonable constant speed).

Additional features:
Throttle position errors, automatic learning throttle ban, wrong signals travel motive, is closed, and closed alarm signal output. Multi-functional regulating motor characteristics.

Method of use:
The power output of motor, electrical connections with adjustable signal and receivers connected channel. Throttle Built-in BEC, support (2-3 seconds, the 4S above need to confirm the transmitter accelerator in BEC) minimum circumstance, open transmitter and receiver connected to the mains power, and the system for 2: for when a voice, says hint sound power/electric/electrical connections. Wait for 1 second motor will BEEP BEEP sound out 2, this is safe, electric tone hint sound has been under control, the receiver when please keep the propeller, lest produce an accident. Security tips sound, tone can press the power of the transmitter, control motor rotate throttle and parking.

If the electric hint sound *, so please check for receiver transmitter state power or.

Note: the electrical signal receiver on lost will immediately send off for output, and for voice. For for for To signal error. Perhaps you can fly field when you press this voice for the vehicle. (PCM receiver transmitter in lost time keeps its normal signal, the control signal tone will not through electric motor provides the voice). Also some receiver with static function, in the circumstances may open the transmitter will be issued for voice, but for for for there is no security tips sound. At this time, please open the transmitter.

Security tip voice sound bigger, may cause the propeller minor action, this is normal. If the security tips sound is not enough, please check the battery or ringing tone to battery power cables.

Setting method:
Cut off power supply, open the adjustable power transmitter and receiver. The transmitter, connect to throttle electrical adjustable mains electricity for hint sound, the sound: for tips, select for single:

1 for - for battery type and quantity project options

2 for - to throttle control options

For 3 - for electricity adjustable working mode option

4 for the dynamic characteristics for - escalation options

For 5 - for advance options

6 for PWM options for --

To hear the option, throttle position to enter submenu among related Settings.

ChanSheng: BEEP - this is the first one project menu for batteries, type and quantity. Voice repeated 3 times, if not done fluctuant, throttle will turn to the first 2 project menu.

If you want to choose inside in the sound, the transmitter after before moving to the middle, waiting for the throttle new hint sound.

NICD NIMH representative, - battery, the electricity/tone can automatically detect battery number, but make sure each open when the battery power is enough. Then in each battery voltage drops to 0.8 V reduces power output of time. When the battery voltage drop below again to 0.7 V when the power cut off completely. This menu all voice repeated 3 times.

If need this option, please voice in the three groups before the end of the throttle to the highest. Wait for change. Note: for a change, at the same time, the system to high frequency sound single select.

Use 6S, -- li-ion polymer battery

Using the 5S, -- li-ion polymer battery

- use, li-ion polymer battery 4S

- use 3S, li-ion polymer battery

2S -- use, li-ion polymer battery


If not, the system will change the transmitter throttle repeated submenu, until the trigger transmitter, select single. Stop choice or cancel the transmitter can at any time to throttle minimum, system will reload, wait for 1 second time data and security tips sound appeared later. Then according to the proportion of throttle power output.

Voice: BEEP BEEP consecutive 2-2 select for throttle control options

Van DE - automatically ADAPTS to throttle

Van DE - fixed throttle, 1.1 (minimum throttle) - 1.8 MS (maximum throttle)

High acceleration,... - for need quick applications.

Van DE - low acceleration, suitable for power battery performance not ideal

Voice: BEEP BEEP consecutive 3-3 select BEEP, electric adjustable working mode option

... - general slow start operating mode

... - 2-4 pole motor constant speed control operation mode

... - 6-10 pole motor constant speed control operation mode

... - 12-16 extremely MaDaHeng speed control operation mode

Voice: BEEP BEEP consecutive 4-4 select BEEP BEEP, basic characteristics dynamic adjustment options

DE... - positive rotation

DE... - reverse rotation

Her -- soft, low voltage protection (power),

... - hard, low voltage protection (stop)

Five: the BEEP BEEP BEEP BEEP BEEP - 5, advance select options

...... - 1 °

...... - 7 °

...... - 15 °

...... - 30 °

Voice: BEEP BEEP for 6 - the BEEP BEEP BEEP BEEP select 6, PWM options,

...... - for most electrical motor, especially the sentinel plants

...... - 16KHZ KV suitable for high KV4000, such as low impedance motor is no trough above the core motor, electrical machinery vibration will obviously reduced, more smooth operation. But choose this option, the adjustment will increase calorific value of 20%, please note radiator.

! When the throttle into the middle, wait for after setting options need options, the throttle to maximum, hear the tone, can complete data set. If you still need to undertake other options setting, throttle to the middle, await choose relevant Settings. If, as in midway exits the throttle to the minimum can not do, and data.

! The above operation can be in a setting of whole set, all set to finish after the throttle to the minimum, wait for after the prompt safety.

The basic setup factory:
Battery for automatic detection (ni-h), automatic control, low acceleration, throttle slowly start-up operation mode, the average Angle for minimum (1 °), PWM: 8KHZ