Specification
* Output: Continuous current 25A, burst current 90A.
* Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.  
* BEC Output: 6V/1.5A.
* Resistance: 0.005 Ohm.
* Motor Supported: Sensorless Brushless Motor
* Suitable Brushless Motor:
        With 4-6 cells NiMH/NiCd or 2 cells Lipo:   On-Road≥12T, Off-Road≥18T;
        With 6-9 cells NiMH/NiCd or 3 cells Lipo:   On-Road≥18T, Off-Road≥24T;
* Suitable Car:  1/16, 1/18 on-road or off-road cars / trucks for normal race or sportful race.
* Size: 31.5mm(L) * 27.5mm(W) * 16mm(H).
* Weight: 23g(Without wires)
 
Features
* Compatible with all sonsorless brushless motor.
* Use top quality electronic components to enhance the current endurance ability of the ESC.
* Excellent start-up, acceleration and linearity features.
* With 3 running modes: Racing mode (Forward),  Forward/Backward mode and Rock Crawler mode.
* With 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive" to suitable for different tracks.
* Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* With 8 steps of timing adjustment to get the best compatibility with various of motors.
* Easily program with only one button and compatible with pocket-sized program card.
* The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).