Description:
* Speed Controller (ESC): EZRUN-80A-SD
* Motor: EZRUN-3674SL 1pcs.
* The motor heat sink and the cooling fan are included.
*  Motor Pinion: 1pcs.
* Program Card: 1pcs.
* Other Accessories: Double-side gummy tape, Screws for fixing  the ESC, Heat-shrink tubings, Logo labels, etc.

ESC Specification:
* Output: Continuous current 80A, burst current 270A.
* Input: 6-12 cells NiMH/NiCd or 2-4 cells LiPo.
* BEC Output: 5.75V/3A (Switch mode built-in BEC).
* Resistance: 0.0018 Ohm.
* Motor Supported: Sensorless and sensored brushless motors
* Suitable Brushless Motor: 8T and > 8T
* Suitable Car: 1/8 on-road or off-road cars / trucks for sportful race and RTR application.
* Size: 68mm(L) * 55mm(W) * 45mm(H).
* Weight: 150g(Without wires)

Features:
* Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
* Excellent start-up, acceleration and linearity features.
* 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
* 4 steps of maximum reverse force adjustment.
* Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
* 9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
* Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
* 8 steps of timing adjustment by software.
* Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
* Easily program with only one button and compatible with pocket-sized Program Card.
* Firmware can be updated through an USB adapter (Optional equipment).
* Splash proof and dustproof.