RC ESC (Electronic Speed Control)

Specification
* Output:  Continuous 100A, Burst 120A up to 10 Secs.
* Input Voltage:  2-12 cells lithium battery or 5-36 cells NiCd/NIMH battery.   
* BEC:  None.
* Control Signal Transmission: Optical
* Max Speed:  210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
                               (BLM: BrushLess Motor)
* Size:  78mm (L) * 55mm (W) * 15mm (H).
* Weight:  112g.

Features
* RC ESC Safety Arming Feature:  Regardless the throttle stick position, the motor will not spin after battery connected.
* Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
* Programmable Items:
       Brake Setting: brake enabled / brake disabled.
       Battery Type: Li-xx (Li-ion or LiPo) / Ni-xx (NiMH or NiCd).
       Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
       Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
       Start Mode: normal / soft / very soft.
       Timing: low / medium / high.
       Lipo Battery Cells: Auto calculate / Set the cells number manually.
       Reset:  reset  all  the programmable items to its default setting.
* RC ESC Full Protection Features: Low voltage cutoff protection / Over-heat protection / Throttle signal lost protection.

Advantages
* Military standard capacitor of extreme low resistance increases the ability of prevention of unwanted RF noise during flying.
* Extreme low resistance PCB is used at the power output section, the whole RC ESC has super current endurance capability.
* Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
* Compatible with Hobbywing's Program Card.